PurePressure Pikes Peak V2 5 Ton Rosin Press

• Heat plates measure 10" x 2.5", maximum temperature of 300°F
• Total force output: 5 tons, or 9,876 lbf @ 120 PSI
• Weighs 130 lb
• Air compressor requirements: 2.1 CFM and over 140 maximum PSI for optimal operation
• Utilizes 5 - 120 PSI compressed air input
• Frame and enclosure is made of A36 steel
• Available in both 115-230v electrical versions (operating voltages are set at the factory, not by the user, so please contact us for more information)
• 115v version electrical information: 6 amps peak draw, 690 watts, 50/60 Hz, 5-15P plug, no dedicated circuit required

*All Pikes Peak units are made to order, and require two weeks lead time before shipping

• 1x Pikes Peak Press
• 2x Vertical orientation legs
• 2x Horizontal orientation legs
• 4x Leveling feet
• 1x Compressed air filter/regulator
• 1x Industrial male air fitting
• 1x Power cable
• 1x 50 pack of PurePressure Tea Bags

• Heat plate size: 10" x 2.5" 
• Heat plate material: 6061 Aluminum or 316 Stainless Steel
• Maximum force output: 9,876 lbs (5 tons)
• Supply air pressure: 120 psi or less
• Air input fitting: "industrial" male
• Maximum heat temperature:300°F
• Digital press time: No limit
• Digital pressure readout
• High accuracy dual heating system
• Vertical or horizontal machine orientation
• Speed control of heat plate actuation
• Dual button safety start
• Parchment clip holders
• Industry-leading safety controls
• Ergonomic user panel in both orientations 

Which Material Should I Use?

Yields range significantly and depend largely on the quality of the materials used.

• Trim: 3% - 8%
• Shake: 8% - 15%
• Flower: 15% - 30%
• Kief / Dry Sift: 30% - 60%+
• Bubble Hash / Hash: 30% - 70%+

Which Micron Bag To Use?

Depending on your material, the proper micron bags are suggested but results will always vary.

For kief, dry sift, hash, and bubble hash, use a 36 micron or 72 micron bag.

72 micron rosin bags will offer higher yields compared to 36 micron rosin bags, but the 36 micron bags will provide the highest quality product.

For flower, trim, and shake, use a 115 micron or 90 micron bag.

You will get the highest yield from a 115 micron rosin bag compared with a 90 micron rosin bag, but the 90 micron bags will give you more filtration and slightly higher quality product.

36 micron - Most filtration available, highest quality output rosin for use with kief, dry sift, hash, and bubble hash

72 micron - High level of filtration, increased yields over 36 microns when pressing kief, dry sift, hash, and bubble hash

90 micron - A higher level of filtration for use with flower, trim and shake rosin pressing

115 micron - Ideal level of filtration and high yielding for use with flower, trim and shake rosin pressing

What Temperature Is Ideal?

How Much Pressure Should I Use?

There is no magic number for how much you need to press but most people use the formula of press pounds/plate surface area.

For example:

A 10-ton press = 20,000 lbs. If you have a 3"x5" plate = 15 square inch.

Hence, 20,000/15 = 1,333 PSI

PurePressure's rosin presses are built to last for many years with proper care. We want you to be satisfied with your equipment so if there are ever any concerns, please do not hesitate to contact us. PurePressure guarantees the following warranty coverage for the Pikes Peak V2 and Longs Peak rosin presses:

• Lifetime end-user support.
• 2 year limited warranty against manufacturing defects for structural components (frame, truss, and support legs) and pneumatic cylinder.
• 1 year limited warranty against manufacturing defects for the entire press including electronic and pneumatic components.

Pure Pressure does not accept returns or exchanges unless the item purchased is defective. If you receive a defective item, please contact us with details of the product and the defect.