Aelius 20W Microgreen LED Tube Light

Aelius 20W Microgreen LED Tube Light - 4 Pack

Crops with lower light requirements — microgreens, leafy greens, propagation, and cloning — don't need a high-power fixture like the Aelius Matrx 730F overhead. The Aelius 20W LED Tube delivers exactly what these crops need: consistent, low-intensity light at 2.5 µmol/J efficacy and 50 µmol/s of photon flux per tube, in a practical T5/T8 replacement form factor. Available in three purpose-matched spectrums — 5000K, 6500K, and 5000K + 660nm & 730nm — each box includes four tubes covering a combined 44" × 48" footprint at 12" spacing.

Installation requires nothing more than cable ties — no mounting hardware, no drivers to wire. Watertight quick-connectors and integrated drivers allow you to daisy-chain up to 20 fixtures from a single power cord, dramatically reducing outlet requirements across large propagation and vertical farming racks. For dense vertical tiers, these tubes are often used alongside the Aelius 120W Under Canopy LED Grow Light to ensure light reaches the lower foliage. Rated IP65 for wet and damp locations, the Aelius 20W LED Tube is built to handle the high-humidity environments these crops are typically grown in.

Features

🌈

Three Spectrum Options

Choose 5000K for general cultivation, 6500K for cloning and propagation, or 5000K + 660nm & 730nm for microgreens and maximum biomass production.

🔗

Daisy-Chain Up to 20 Fixtures

Watertight quick-connectors and integrated drivers let you link up to 20 tubes from a single power outlet — covering large propagation racks with minimal wiring.

🔧

Cable Tie Mounting

Two mounting holes at each end of the tube allow for simple cable tie installation directly onto clone and propagation racks — no tools or hardware required.

📦

Sold in Sets of Four

Each box includes four tubes with a combined coverage area of 44" × 48" at 12" spacing — sized to match standard propagation trays and clone rack shelves.

💧

IP65 Wet Location Rated

Rated IP65 for wet and damp locations, the Aelius 20W tube handles the high-humidity environments common to propagation domes, clone rooms, and microgreen setups.

🔌

Integrated Driver

Each tube has a built-in driver — no external driver box, no extra cabling. A direct T5/T8 replacement that installs faster and runs cleaner than legacy fluorescent setups.

What's Included

4x LED Tube
1x 120V AC Power Cord (1.8 meter)
1x 0.9-meter AC Extension
8x Cable Ties
1x IP65 End Cap

Specifications

Specification	Value
Model Numbers	F-TL02050K-LSN (5000K) / F-TL02065K-LSN (6500K) / F-TL020RFR-LSN (5000K+660nm&730nm)
Wattage	20W
Efficacy (400–800nm)	2.5 µmol/J
Photon Flux (400–800nm)	50 µmol/s
Voltage Range	120–240V AC
Frequency	50/60Hz
Power Factor	0.90
THD @ 100% Power	<20%
Dimmable	No
Driver	Integrated
LED Optics	120° Primary Optics
Dimensions (single bar)	46" (L) × 2.6" (H) / 1160mm × 38mm
Weight (single bar)	0.8 lbs
Individual Coverage	8" × 44"
Total Box Coverage (4 tubes)	44" × 48" (12" spacing)
Daisy Chain	Up to 20 fixtures
IP Rating	IP65 (Damp/Wet Locations)
Lifetime	Q70 > 20,000 hrs
Certifications	ETL, CE, RoHS, DLC HORT

The Spectrums

5000K Spectrum

A versatile balanced white light spectrum that supports any growing method. Reliable, consistent, and well-suited for everyday cultivation of leafy greens, herbs, and general propagation.

6500K Spectrum

Blue-dominant light that promotes cell division, elongation, and healthy tissue culture growth — purpose-built for cloning and propagation setups where rooting and early development are the priority.

5000K + 660nm & 730nm Spectrum

Tailored for microgreens, this spectrum balances blue, white, red, and far-red wavelengths—much like the targeted output found in the Aelius Matrx REDD LED Grow Light—for maximum biomass output, increased yields, and stronger genetic expression.

Support & Manuals

📄 Aelius 20W LED Tube Manual 📄 Aelius 20W LED Tube Spec Sheet

Warranty

The Aelius 20W LED Tube is backed by a 5-year limited warranty. Coverage applies to defects in materials and workmanship under normal operating conditions. Improper installation, operation, or servicing outside of manufacturer guidelines will void warranty coverage.

Frequently Asked Questions

Which spectrum should I choose for my application? +

Choose the 5000K for general leafy greens, herbs, or any crop that benefits from balanced white light across all growth stages. Choose the 6500K if you're running a cloning or propagation setup — its blue-dominant output specifically promotes cell division and healthy rooting. Choose the 5000K + 660nm & 730nm if you're growing microgreens and want to maximize biomass and yield through the addition of red and far-red wavelengths.

How many tubes can I daisy-chain together from one outlet? +

You can daisy-chain up to 20 tubes in a single loop from one power outlet. Connect the power cord to the male end of the first tube, chain the remaining tubes using the quick-connectors, and place the included IP65 end cap on the last tube in the chain to seal the final output terminal safely.

How do I mount the Aelius 20W LED Tubes to my rack? +

Each tube has two mounting holes at each end. Route the included cable ties through the mounting holes and secure the tube directly to your clone rack or shelving frame — no additional hardware is needed. For multiple tubes, repeat the process for each one before daisy-chaining them together.

What is the total coverage area for a box of four tubes? +

Each individual tube covers an 8" × 44" area. When all four tubes in a box are mounted at 12" spacing, the combined coverage footprint is 44" × 48" — sized to align with standard propagation trays and clone rack shelf dimensions.

Are the Aelius 20W LED Tubes safe to use in high-humidity environments? +

Yes. The tubes are rated IP65, meaning they are certified for use in wet and damp locations. This makes them well-suited for propagation domes, clone rooms, and microgreen growing setups where elevated humidity is a regular operating condition.

Can these tubes be dimmed? +

No. The Aelius 20W LED Tube does not support dimming. It operates at full power when connected and is designed for straightforward on/off use in propagation and low-light crop applications where intensity adjustment is not typically required.

Do these replace existing T5 or T8 fluorescent fixtures? +

Yes. The Aelius 20W LED Tube is designed as a direct T5 and T8 replacement with integrated drivers, meaning no ballast rewiring is required. Simply mount using cable ties and connect to power — no need to modify or retain existing fluorescent fixture hardware.

Language

Search

Aelius 20W Microgreen LED Tube Light - 4 Pack

Commercial & Bulk Purchasing

Who This Is For

What We Found

What Users Say

Aelius 20W Microgreen LED Tube Light - 4 Pack

Features

Three Spectrum Options

Daisy-Chain Up to 20 Fixtures

Cable Tie Mounting

Sold in Sets of Four

IP65 Wet Location Rated

Integrated Driver

What's Included

Specifications

The Spectrums

5000K Spectrum

6500K Spectrum

5000K + 660nm & 730nm Spectrum

Support & Manuals

Warranty

Frequently Asked Questions

Questions About This Product?

Why Trimleaf

Customer Reviews

You may also like

Language

Language