Aelius Matrx 730F Full Spectrum LED Grow Light

Both fixtures share the same folding aluminum form factor and 5×5 ft coverage area, but the 730F delivers higher output — 2,235 µmol/s at 726.3W versus the Aelius Matrx 650F's 1,700 µmol/s at 649W. The 730F also uses the XRF Spectrum while the 650F uses the CX Spectrum. Both are proven full-cycle profiles, but the 730F is the better choice for growers who want more intensity and efficacy in the same footprint.

Yes. The XRF Spectrum is a proven full-cycle spectrum that provides ideal light conditions from seedling and vegetative stages through flowering and fruiting. Its balanced wavelength distribution across 400–800nm makes it effective with a wide variety of crops without needing to swap fixtures between growth phases.

The Matrx 730F is engineered for low-to-standard ceiling heights and vertical racking installations. At only 3 inches tall (78mm), the folding frame keeps overhead clearance requirements minimal, making it well-suited for multi-tier rack systems or any grow space where height is a limiting factor. For smaller vertical shelving, the Aelius 300 Bar LED Grow Light offers a more compact footprint.

Insert a dimmer or controller data cord into one of the RJ-12 ports on the driver. To link additional fixtures, plug a daisy-chain data cord from the second RJ-12 port into the next fixture's RJ-12 port and repeat until all lights are connected. Refer to your controller's specifications for the maximum number of fixtures supported per dimming channel.

Yes. The Matrx 730F is DLC HORT certified, qualifying it for horticultural lighting rebate programs offered by many North American utilities. Contact your local utility provider to confirm eligibility and rebate amounts available in your region.

Yes. The Matrx 730F carries an IP65 rating, certifying it for use in damp and wet locations. It is suitable for high-humidity grow rooms, greenhouses, and similar environments where moisture exposure is a regular concern. For intense lighting in lower canopy areas, pairing this fixture with Aelius 120W Under Canopy LED Grow Lights can further enhance results in dense environments.

Routinely remove dust and debris from the LED modules, heat sink, and driver using low-pressure compressed air or a gentle water rinse. Never pressure wash the fixture. Always power down and allow the unit to fully cool before performing any maintenance, and avoid touching individual LEDs with bare fingers to prevent electrostatic discharge damage.