FREE SHIPPING OVER $50!*
If you find a price lower than ours, we'll match it! Learn more.
De-stemming buds need a lot of precision, so as not to break the buds. And you cannot rush it because that compromises quality. What if you can have one system to de-stem with precision while saving time?
CenturionPro answers the call for quality and precise de-stemming with the GC1 Bucker. Apply gentle pressure in every feed, as the GC1 takes care of the rest of the process. With three sizes of inserts, you can buck 40 pounds of wet flowers or 8 pounds dry in an hour. The GC1 lets you do the job of up to three (3) people, thanks to its 0.25 horsepower motor that delivers 3,000 cuts per minute. Quality is never compromised because every bud bucked is preserved.
Choose from three (3) feed entries of 3/16, 1/4, and 3/8 inches, so you have all sizes covered for the job. Set up is effortless with the GC1, and clean up takes little effort. Keep on bucking as this bucket needs minimal maintenance. For an even more streamlined experience, you can integrate the GC1 with your CenturionPro trimmers. Go from bucking to trimming in seconds when you combine it with the conveyor system.
You can also upgrade your GC1 from a tabletop to a portable machine with the Bucker stand. Comes with industrial casters with an option for off-road field wheels, you can take your GC1 wherever it's needed.
The GC1 comes with a five-year warranty, so you have peace of mind.
Upgrade your GC1 tabletop bucker to include a stand! The stand allows for easy portability of the CenturionPro GC1 bucker from one location of your production facility to the other without breaking a sweat.
The GC1 bucks your buds with gentle pressure, so the quality is preserved. Choose from three different feed entries for the right size.
What three (3) people can do, the GC1 does it on its own by delivering 3,000 cuts a minute with its 0.25 horsepower. Process up to 40 pounds of wet buds or 8 pounds dry in an hour.
No need for fancy tools for the GC1 to work. Clean up can be done in minutes.
The GC1 can be integrated with other CenturionPro for a seamless workflow from bucking to trimming. Add the Bucker stand so you can take it wherever it's needed.
|Input Voltage||NA: 120V, 60Hz Single Phase|
|EU, AUS: 240V/50Hz, Single Phase|
|Current Draw||< 3A Operating|
|Motor RPM||1750 RPM|
|Weight (w/o stand)||40lbs / 18kg|
|Length||28in / 71cm|
|Width||14in / 36cm|
|Height||15in / 38cm|
|Circuit Breaker Required||NA: 15A/120V|
|EU, AUS: 15A/220V|
Say goodbye to downtimes with the CenturionPro GC Bucker Parts Kit.
Instead of having to wait for the clean-up of your Bucker components, the GC Bucker Parts Kit gives you an extra set of parts, so you keep the work going.
Blower Motor not working? Swap in a replacement while you have the current motor checked.
It pays to have two of each part, so your workflow does not have to stop.
Each GC Bucker Parts Kit contains:
These components are easy to install and need no special skills to install.
Downtimes slowly become a thing of the past, thanks to the Parts Kits of CenturionPro.
CenturionPro Solutions (the manufacturer) will repair or replace, without charge, any parts have proven defective in material or workmanship for a period of 5 years on the Bucker Machine and 1 Year on the Blower
The warranty period will begin on the date the machine(s) is purchased by the initial purchaser. Product or component warranty defects can be remedied at any authorized service dealer, or directly at the manufacturer.
Any service work performed, and deemed valid due to a defective part, will be free of charge. CenturionPro Solutions reserves the right to use any manufacturer-approved replacement part for the warranty repair.
The machine or defective part then must be returned to the manufacturer for analysis or replacement at the cost of the owner. Parts deemed to be covered under the warranty will be provided for free excluding shipping costs.
Do not return the machine to the place of purchase for repair or warranty claims, unless you have been authorized by CenturionPro Solutions to do so. The place of purchase can only sell replacement parts and will not repair any warranty issues unless it is noted as an authorized repair dealer and has been authorized to work on your machine.
All sales final.
Be the first to ask a question about this.