Product was at my door in 3 days, impressive.
Product works GREAT !
Pre operation inspection found a burr along the edges of the reel, a quick once over with a needle file cleaned it right up.
Some mechanical inclination is required to properly operate thie machine and achieve great results and I won't elaborate on how I operate it for fear others may hurt themselves. No unbuttoned long sleeves, long hair or jewelry should be worn during operation unless you want a tale of sorrow and woe to share with friends.
The vacuum is very powerful, even with the damper wide open and product may get trapped in the tumblers center, just turn off the vacuum and everything comes out quickly, the reason for this is that it's a standard product and the lowest horsepower motor they use, but it's a small machine, some 1/4" holes drilled in the top cover will fix this, just cover them with tape if not needed . If I were centurion I'd put some adjustable circular vents on the cover for adjustable air flow, but only on the table top model.
In all I'm very pleased with Trimleaf and the machine.
For maintenance/ lubing bearings, pick up some Lucas red & tacky in a spray can wherever you can find it, the nozzle fits right in there.
I also removed the blade cleaned it with alcohol and honed it lightly with a 800 grit diamond stone until it was almost sharp enough to cut flesh and I'm getting a nice clean cut.
I won't ever trim solely by hand ever again, love this machine.