Aelius Matrx 320 Lite LED Grow Light - XR or REDD Spectrum

Choose the XR Spectrum if you want a single fixture that performs reliably from seedling through veg and into flower — it's a versatile, all-purpose option similar to the Aelius 300 Bar LED Grow Light. Choose the REDD Spectrum if your primary goal is maximizing flowering output or if you're using the fixture for greenhouse supplemental lighting. To further optimize yields, many growers pair these with Aelius 120W Under Canopy LED Grow Lights.

Yes. The Matrx 320 LITE is designed to expand by linking additional sections side by side using the included RJ-12 daisy-chain cable. The male and female connectors butt together between sections, and the last output terminal on the final section must be covered with an end cap for safe operation. Each section operates independently at 320W, so you can scale coverage incrementally as your grow expands.

A single section covers a 2×4 ft canopy footprint at full power. Linking two sections side by side expands coverage to approximately 4×4 ft, and so on. The recommended mounting height is 8"–24" above the canopy for optimal light efficiency and uniformity — monitor canopy temperature regularly to confirm the ideal height for your environment.

The Matrx 320 LITE supports up to 5 fixtures at 120V, 9 at 208V, 10 at 240V, and 12 at 277V per dimming chain. When daisy-chaining for dimming control, make sure the dimming knob on each fixture is set to the EXT position and connect the telephone wire through the 0-10V jacks on each unit.

No. The Matrx 320 LITE features a built-in driver — no separate driver unit is required or included. This contributes directly to the fixture's lightweight 8.38 lb profile and simplified installation, particularly in vertical racking environments where minimizing weight and overhead clutter is important.

The Matrx 320 LITE is purpose-built for low ceiling heights and vertical racking installations. At just 2" tall — the slimmest profile in the Aelius lineup — it maximizes usable vertical space in multi-tier rack systems where every inch of clearance matters.

Disconnect from power before any cleaning. Remove dust from the light bar using low-pressure compressed air, then clean the diode array with a soft cloth — avoid scratching. Never touch the diodes with bare hands, even when the fixture is unpowered. Keep the fixture away from water, oil, and organic solvents, and store in a dry environment between -20°C and 65°C.