The CenturionPro HP1 Buckers is the high-powered solution for gentle bucking.
Featuring five inserts of up to 3/4 inches in diameter, you can buck wet buds of up to 175 pounds or dry buds of up to 35 pounds in an hour.
The HP1 is powerful enough to do the job of up to seven workers, thanks to its 0.75 horsepower motor. Feed it continuously to get the most mileage every use.
The HP1 is durable and easy to clean, thanks to its anodized aluminum and stainless steel build.
The HP1 is a tabletop unit that can be upgraded with the Bucker Stand. Take it anywhere with the Bucker Stand’s industrial casters, or upgrade to the Off-Road Field Wheels so you can go from harvest to bucking in minutes.
Use the HP1 with other CenturionPro products for a seamless transition between processes of your production.
Covered with a five-year warranty, use the HP1 without worrying about after-sales support.
The HP1 does the job of seven (7) workers without problems. Process up to 175 pounds of wet buds or 35 pounds of dry buds in an hour, with its 0.75 horsepower motor.
Featuring five entry holes of up to 3/4 inches in diameter, you can process buds of different sizes.
The HP1 is made of stainless steel and anodized aluminum, making it a durable build. A five-year warranty covers the HP1, so you don’t need to worry about after-sales support.
Upgrade the HP1 with the Bucker Stand and take it where it’s needed. Integrate it with your other CenturionPro products for a seamless workflow.
NA: 120V, 60Hz Single Phase
EU, AUS: 240V / 50Hz, Single Phase
|Current Draw||< 2.5A Operating|
|Drive Motor||0.75HP, IP54|
|Motor RPM||1690 RPM|
|Weight (w/o stand)||100lbs / 45kg|
|Length||24in / 61cm|
|Width||18in / 46cm|
|Height||22in / 56cm|
|Circuit Breaker Required||
EU, AUS: 15A/220V
Keep your HP Bucker in the best condition with the CenturionPro HP Bucker Parts Kit.
Each HP Bucker Parts Kit was designed as a direct replacement for essential components of the Bucker.
Instead of waiting for the maintenance of these parts, you drop in a replacement and keep the production running.
Each HP Bucker Parts Kit contains
Be steps ahead by having the essential parts on hand.
Say goodbye to downtimes with the CenturionPro Parts Kit.
CenturionPro Solutions (the manufacturer) will repair or replace, without charge, any parts have proven defective in material or workmanship for a period of 5 years on the Bucker Machine
The warranty period will begin on the date the machine(s) is purchased by the initial purchaser. Product or component warranty defects can be remedied at any authorized service dealer, or directly at the manufacturer.
Any service work performed, and deemed valid due to a defective part, will be free of charge. CenturionPro Solutions reserves the right to use any manufacturer-approved replacement part for the warranty repair.
The machine or defective part then must be returned to the manufacturer for analysis or replacement at the cost of the owner. Parts deemed to be covered under the warranty will be provided for free excluding shipping costs.
Do not return the machine to the place of purchase for repair or warranty claims, unless you have been authorized by CenturionPro Solutions to do so. The place of purchase can only sell replacement parts and will not repair any warranty issues unless it is noted as an authorized repair dealer and has been authorized to work on your machine.
All sales final.
Be the first to ask a question about this.