The Photontek SQ 300W is a full-spectrum LED grow light for those tight spaces.
Designed for low hangs, the SQ 300W gives you balanced PPFD intensities at a low wattage.
The SQ 300W features a high photon efficacy at 2.7 umol/J. You get a homogenous light spread at close distances, so your plants get sufficient lighting.
Behind the power of the SQ 300W are the Photontek drivers and premium white, red & far-red LEDs.
And with its square design, the SQ 300W delivers outstanding light distribution.
Unlock the potential of the SQ 300W with the Photontek Digital Lighting Controller, which lets you manage up to 100 grow lights.
But even if you have your controller system, the SQ 300W integrates easily with any control system that uses a 0-10V output signal or an RJ to 0-10V control adaptor.
The SQ 300W is a full spectrum LED fixture that covers the whole growth cycle of plants in smaller grow spaces.
The square formation of the SQ 300W provides better lighting quality, especially at lower hangs.
The SQ 300W uses only the best components, such as the Photontek Driver, and premium white, red & far-red LEDs.
This grow light LED is designed with all grow cycles periods in mind, from propagation, to vegetative and flowering, this fixture may be dimmed, allowing you to adjust PPFD levels produced without losing efficiency.
P-Tek SQ Pro LED grow lights use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption.
|Input Voltage:||120-277V, 50-60Hz|
|Input Power (100%):||310W|
|Input Current (100%):||2.72A (120V); 1.4A (230V); 1.16A (277V)|
|Footprint:||Up to 3.3’x3.3’|
|Lifetime:||60 000 hrs|
|Light Source:||Higher Spec White, Red & Far Red Diodes|
|Dimmable:||OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)|
|External Control:||With P-Tek Digital Controller|
Photontek warrants the mechanical and electronics components of their product to be free and defects in material and workman-ship if used under normal operating conditions for a period of (5)years from the original date surface.
Be the first to ask a question about this.